Get Your IPTV Access Codes

 To pair the MX3 air mouse, insert the USB dongle into your device, 

Then press and hold "OK" + "TV" for 3 seconds until the red LED flashes, indicating pairing. 

Ensure batteries have power, and if the cursor doesn't appear, press the Cursor Lock button.

 For IR learning, hold the "TV" button to program power/volume keys 

1. Hold the TV button in the bottom-left corner of the remote until the power light begins to flash rapidly. Then release it. The power light will then begin to flash at a moderate pace.
2. On the IR remote you wish to learn the IR code from, point the head of the IR remote at the head of the MX3/L. Make sure it is very close (around 0.5cm).
3. Press and hold the power button on the IR remote until the power light on the MX3/L stops flashing.
4. Press the power button on the MX3-L. The power light will then resume flashing at a moderate pace, indicating that the IR code has been learned.
5. This process can be repeated with the four colour buttons at the bottom of the MX3/L, so if your IR remote has colour buttons, you can clone those as well via the same method as above